Amplifier, ADL5565 [PCB: 1307]
Recommended Bias Controller: XM-B1E3-0405D
|Low Freq (MHz)|
|High Freq (MHz)|
Power-up Sequence 1. Apply VCC = +3.3V 2. Apply EN = +3.3V Verify IDD ~80mA 3. Apply RF Input Power-down Sequence 1. Remove RF Input 2. Turn off EN 3. Turn off VCC
VCOM: Optional, A voltage applied to this pin sets the common-mode voltage of the input and output. Typically decoupled to ground with a 0.1 µF capacitor. With no reference applied, input and output common mode floats to midsupply (VCC/2). EN: Enable. Apply positive voltage (1.5 V ≤ ENBL < VCC) to activate device.