Reference Design Kits

XM-RDK-200

XM-RDK-200

$5,330

Getting Started Plate
DC – 40 GHz
Includes: Synthesizer, Switch, Filters, Splitter, and more.

The Getting Started Plate is a great way to evaluate a wide range of X-Microwave components on a single prototyping plate. The Getting Started Plate can be ordered with a single part number XM-RDK-200.

Learn More about the XM-RDK-200

Component Overview

(1) Synthesizer

(2) Lumped Element Filter

(3,4) Planar Filters

  • (3)  Band Pass Filter, XM-A265-0604D, DLI AFL05158, [PCB 079], CF=15G BW=7.5G
  • (4) Band Pass Filter, XM-A2B3-0404D, DLI B096QC2S [PCB 082], CF=10G BW=5.4G

(5) Digital Step Attenuator

  • DSA, XM-A7D4-0604D, IDT F1956, [PCB 0701], F=1M-6G, 31.75dB, 7bit

(6) Transmission Line w/ Interconnect

  • 0404 Transmission Line, XM-A2M7-0404D, [PCB 306], F=DC-50 GHz (Qty 2)

(7) Switch

  • SPDT Switch, XM-A6J9-0409D, pSemi PE42525, [PCB 0456], F=40M – 60GHz

(8) Splitter

  • 2-Way Splitter, XM-A3R3-0409D, Mini-Circuits EP2K1+, [PCB 364B], F=2G-26.5G

(9,10) Amplifiers

  • (9) 15.5dB Amp, XM-A3A2-0404D, Custom MMIC CMD197C4, [PCB 320], F=1G-24G
  • (10) 20dB Amp, XM-A3Y2-0404D, MACOM MAAL-011130, [PCB 403], F=2.4G-18.5G

This kit also includes:

  • 32 x 32 Prototyping Plate
  • RF Probes (Qty 5)
  • Anchors and gsg jumpers
  • Bias and control boards for each active RF block
  • Walls and lids for the synthesizer
  • Jumper wire
  • XM-HT-01 (Sticky gsg placement tool)
  • XM-HT-02 (1/8″ Hex Wrench)
  • Required screws